- Features up to 8-hour battery run time, 328-feet (100m) range
- Ultracompact, lightweight and incredibly easy-to-use
- Camera-mountable dual receiver (RX) features Mono/Stereo output setting
- Transmitter (TX) has built-in mic and can be clipped to shirts
-
Blink 500 Pro TX Transmitter with OLED Display, Built-In Microphone and Clip
-
Blink 500 Pro RX Dual Receiver with OLED Display, Built-In Clip and Camera Shoe-Mount
-
Blink 500 Pro B1 Portable Charging Carry Case
-
SR-M1 Omnidirectional Lavalier Microphone
-
Alligator-Style Lavalier Microphone Clip
-
Foam Lavalier Windscreen
-
Furry High-Wind Press-On Windscreen for Blink 500 Pro TX Transmitter
-
Zipper Bag
-
1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras
-
1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable for Smartphones, Tablets and Computers
-
1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable
-
1’ Gold-Plated Micro USB to USB-A Charging Cable
-
Limited 1-Year Warranty
Description
Transmitter Specifications: | |
---|---|
Reception Type: | 2.4GHz Digital Frequency |
RF Frequency Band: | 2400 to 2483.5 MHz |
Modulation: | Gaussian Frequency-Shift Keying (GFSK) |
Operating Range: | Up to 328' / 100m |
RF Output Power: | 10mW |
Built-in Microphone Polar Pattern: | Omnidirectional |
Frequency Response: | 50Hz to 18KHz |
Built-in Microphone Maximum SPL: | 120dB |
Built-in Microphone Sensitivity: | -39dB |
Lavalier Microphone Maximum SPL: | 110dB |
Lavalier Microphone Sensitivity: | -39dB |
Reference Audio Input Level: | -30~-42dBv MIC input, 0dB Attenuation |
Input Connector: | 3.5mm Mic In / Line In (Mic with Plug-in-Power) |
Digital Signal Resolution: | 24bit / 44.1kHz |
Signal-to-Noise Ratio: | ≥78dB |
Voice Delay: | ≤6ms |
Distortion: | ≤0.05% |
Power Requirements: | Built-in Li-ion Battery, Micro USB DC 5V or Charging Contact |
Battery Life: | Approximately 8-hours |
Antenna: | PIFA Antenna |
High-contrast OLED Screen Resolution: | 128 X 64 pixels |
Other Functions: | Tactile Mute Function |
Weight: | 1.13oz / 32g |
Dimensions: | 2.22 x 1.5 x 1.03” / 56.5 × 38 × 26.1mm |
Operating Temperatures: | 0° to 122°F / 0°C to 50°C |
Storage Temperatures: | -4° to 131°F / –20°C to +55°C |
SR-M1 Lavalier Specifications: | |
---|---|
Acoustic Principle: | Electret Condenser |
Polar Pattern: | Omnidirectional |
Connector: | 3.5mm |
Cable Length: | 4.1’ / 1.25m |
Maximum SPL: | 110dB |
Sensitivity: | -39dB+/-2dB(0dB=1V/Pa,1kHz) |
Signal-to-Noise Ratio: | ≥60dB |
THD: | <1% (94dB SPL at 1kHz) |
Power Requirements: | Plug-in-Power (1V~10V) |
Standard Operating Voltage: | 3V |
Current Consumption: | <500μA |
Output Impedance: | <2.2KΩ |
Receiver Specifications: | |
---|---|
Reception Type: | 2.4GHz Digital Frequency |
RF Frequency Band: | 2400 to 2483.5 MHz |
Modulation: | Gaussian Frequency-Shift Keying (GFSK) |
Operating Range: | Up to 328' / 100m |
Line Output Connector: | 3.5mm |
Output Level: | -60dBV to -20dBV |
Output Mode Types: | Mono / Stereo |
Digital Signal Resolution: | 24bit / 44.1kHz |
Signal-to-Noise Ratio: | ≥78dB |
Voice Delay: | ≤6ms |
Distortion: | ≤0.05% |
Headphone Output Connector: | 3.5mm |
Power Requirements: | Built-in Li-ion Battery, Micro USB DC 5V or Charging Contact |
Battery Life: | Approximately 8-hours |
Antenna: | PIFA Antenna |
High-contrast OLED Screen Resolution: | 128 X 64 pixels |
Weight: | 1.13oz / 32g |
Dimensions: | 2.2 x 1.5 x 1.16” / 56 × 38 × 29.4mm |
Operating Temperatures: | 0° to 122°F / 0°C to 50°C |
Storage Temperatures: | -4° to 131°F / –20°C to +55°C |
Blink 500 Pro B1 Charging Case Specifications: | |
---|---|
Power Requirements: | Powered by USB-C port to USB-A Charger (5V/1.5A) |
Power Capacity: | 1200mAh |
Box's Charging Time: | 3-hours |
Weight: | 7.05oz / 200g |
Dimensions: | 4.84 x 4.02 x 1.56” / 123 x 102 × 39.7mm |
Operating Temperatures: | 0° to 122°F / 0°C to 50°C |
Storage Temperatures: | -4° to 131°F / –20°C to +55°C |